Employment Opportunities

Position available: Small Engine Mechanic


Hours: Monday to Friday

8am to 5pm


All Seasons Farm Equipment (ASFE) is searching for an experienced Small Engine Technician.

In this position, the right candidate will demonstrate proficiency in the diagnosing and repair of a wide variety of outdoor power equipment.

The right candidate will be required to independently perform basic and complex diagnostic and service repair to include, not limited to the following:

  1. Two cycle and Four-cycle engines
  2. Trimmers, Edgers, Blowers, Chain Saws, Pole Saws, Hedge Trimmers, Commercial and Residential Zero Turn Mowers.
  3. Electromagnetic Power take off systems
  4. Electrical diagnostics
  5. Hydraulic systems (Trans Axels, Hydraulic pumps and Wheel motors)
  6. Powertrain (differentials/transmissions/gear boxes/drive shafts)
  7. Electronic Service tool diagnostics for EFI four cycle engines (ECM’s/ECU’s/sensors)

The Service Tech will report directly to the Service Manager and adhere to ASFE Parts and Service Procedure as well as core values of integrity, communication, safety, employee development and accountability.

Duties and Tasks

  • Recondition and repair of outdoor power equipment
  • Perform diagnostic inspections as directed
  • All inspections are to be completed with cause of failure identified
  • Makes certain that work assignment is correct and must ask for clarification if there are questions
  • Recondition and repair of equipment and components
  • Plan methods and sequence of performing repairs assigned
  • Order all parts and materials required to perform assigned repairs
  • Effect the repairs required in a safe and effective manner
  • Ensure that all repairs are completed as assigned
  • Ensure the cleanliness of the customer's equipment upon completion as required
  • Ensure all parts and materials not used are returned per guidelines
  • Maintain the work area in a clean and safe condition
  • Problem solving and trouble-shooting
  • Performs setup or pre-delivery inspections on new or used equipment as directed by the manufacturer's manual
  • Maintain good working records for time, parts, supplies and outside purchases during repairs         
    • All record keeping methods are followed as per ASFE Parts and Service Procedure
    • Ensure that all record kept are legible and in compliance with ASFE Parts and Service Procedure
  • Maintain and care for shop tools, equipment and vehicles
    • All tools and special equipment used on repairs are to be cleaned before their return
    • All specialty tools used on any repair is to be returned to the original location and in good working condition
  • Responsible for checking of e-mail correspondence and associated attachment Read and intrepid operating/maintenance and procedure manuals
  • Apply common sense to carry out written or oral instructions


  • High school diploma or GED equivalent


  • Minimum of 2+ years of experience in equipment maintenance and Basic Service Technical certification preferred

Tool Requirements

  • Basic hand, Pneumatic, and electrical diagnostic tools required.
  • Lockable Tool Storage: Three to Seven drawer Rolling Service Cart, or Professional top chest 5 to 10 drawer, or Professional Roll Away Tool Cabinet 5 to 14 drawers
    • A list of required tools is included with this job posting - All Seasons Farm Equipment does not supply tools required to complete the day-to-day repairs for this position.

Physical Requirements

  • Must have the ability to lift at least 75ibs repeatedly
  • May be subject to sitting, standing, climbing. grasping, reaching. stooping, crouching


  • Valid State Driver's License
  • Valid Commercial Driver's License (preferred) Technical School and/or Trade School Certification


  • Criminal background check Drug Screening

Core Values


  • All communications with customers is in a manner reflecting respect and honesty
  • Engage in an open, honest and constructive conversation with co-workers
  • Information shared should be complete and accurate, as well as appropriate both in content and audience
  • Build good working relationship with management and co-workers
  • Be approachable and be accepting of constructive feedback to learn
  • Respect and maintain confidentiality


  • Avoid situations which would be considered inappropriate
  • Avoid participation in rumors, gossip and subjective opinions
  • Exhibit honesty and trustworthiness


  • Perform all work, equipment and vehicle operation in a safe and responsible manner
  • Check work area for hazards
  • Recognize, correct and report any unsafe situations posed by yourself or others
  • Comply with all policies and procedures when performing repairs
  • Recognize and prevent any on the job accidents

Employee Development

  • Be willing to show initiative
  • Seek opportunities for professional growth and skill development
  • Attend training classes when directed by the Service Manager


  • Accept personal responsibility for the quality and timeliness of work
  • Must meet goals and deadlines assigned
  • Take ownership of assignments and admit to mistakes despite potential negative consequence

All Seasons Farm Equipment was established in 2001 and has grown to be an exclusive New Holland Equipment Dealership specializing in Agriculture and Outdoor Power Equipment. We offer a competitive benefit package which includes paid vacations and holidays, as well as an incentive/bonus program


This job description is only a summary of typical functions of the job, and not an exhaustive or comprehensive list of all possible job responsibilities, tasks and duties.

Responsibilities, tasks and duties of the jobholder might differ from those outlined in this job description, and that other duties as assigned, might be part of the job.

Resumes can be forwarded to David Long at the following e-mail: asfe@cableone.net

Please, no phone calls

ASFE Required Tool List

Safety Equipment

  • 1 Pair of Leather Work Boots
  • 1 Pair of Safety Glasses
  • 1 pair of Work Gloves
  • Uniforms provided 11 Pants & Shirts


Tool List

  • 1 Pliers-slip joint
  • 1 Pliers-needle nose
  • 1 Pliers-diagonal wire cutters
  • 1 Pliers-channel lock type 10”, 16”
  • 1 Pliers-6” vise grip
  • 1 Pliers-10” vise grip
  • 1 Pliers-wire strippers/crimpers
  • 1 Pliers-oil filter 9”, 12”, 15”
  • 1 Set of internal/External snap ring pliers .38 .47 .70 .90
  • 1 Spark plug boot removal pliers
  • 1 Screwdriver set-including 4 standard, 4 Phillips # 1,2,3,4
  • 1 Pocket screwdriver
  • 1 Torx T20 & T27 tee handle
  • 1 Standard Allen wrench set
  • 1 Metric Allen wrench set
  • 1 Prybar set 12”, 17”, 25”
  • 1 pinch bar 24”
  • 1 O-ring pick set 
  • 1 ¼” drive standard/metric socket set (deep and shallow) 5/32”- 9/16”, 5mm-14mm
  • 1 3/8” drive standard/metric impact socket set (deep and shallow) 5/16”-3/4”, 8mm-19mm
  • 1 ½” drive standard/metric impact socket set (deep and shallow) 3/8”-1 ¼”, 10mm-24mm
  • 2 3/8” drive spark plug sockets 1) 13/16” 1) 5/8”
  • 1 ¼” ratchet and extensions
  • 1 3/8” ratchet and extensions
  • 1 ½” ratchet and extensions
  • 1 ½” pull handle
  • 1 standard set of combination wrenches 5/16-1”
  • 1 metric set of combination wrenches 7mm-22mm
  • 1 adjustable crescent wrench
  • 1 pipe wrench
  • 1 Test Light-circuit powered
  • 1 Digital Multimeter 
  • 1 Electrical test leads
  • 1 Spark plug tester
  • 1 LED Flashlight
  • 1 Air chuck
  • 1 Tire Gauge
  • 1 Valve core removal tool
  • 1 Air blow Gun
  • 1 25’ Tape Measure
  • 1 Center punch set
  • 1 Brass drift punch
  • 1 Roll pin punch set
  • 1 Chisel Set
  • 1 Wire Brush
  • 1 File Set
  • 1 Spark Plug gap gauge
  • 1 Set of flat feeler gauges
  • 1 Telescoping Magnetic pick up tool
  • 3 Ball peen hammers-8oz, 20oz, 24oz
  • 1 32oz or 48oz Ball peen/Dead blow hammer
  • 1 Plastic tip hammer
  • 1 Rubber Mallet hammer
  • 1 Dead Blow Hammer
  • 1 Gasket Scraper
  • 1 Battery Terminal Cleaner
  • 1 Oil Filter wrench set (band, strap, or cup)
  • 1 Magnetic parts tray
  • 1 Magnetic work light
  • 1 Die grinder
  • 1 1/2” Pneumatic Impact gun
  • 1 3/8” Lithium Ion Impact gun
  • 1 1/2” Lithium Ion Impact gun
  • 1 Lockable Tool Storage 3-7 drawer rolling service cart
  • 1 Professional Top Chest 5-10 drawer
  • 1 Professional Roll Away Tool Cabinet 5-14 drawer